“
“Steel-concrete-steel (SCS) sandwich panels are an effective means for protecting personnel and infrastructure facilities from the effects of external blast and high-speed vehicle impact. In conventional SCS construction, the external steel plates

are connected to the concrete infill by welded shear stud connectors. This paper describes a programme of research in which the non-composite SCS panels with axially restrained connections were studied experimentally and numerically. High fidelity finite element models for axially restrained steel-concrete-steel panels subjected to BMS-777607 datasheet impact loading conditions were developed using LS-DYNA. The simulation results were validated against the dynamic testing experimental results. The numerical models were able to predict the initial flexural response of the panels followed by the tensile membrane resistance at large deformation. It was www.selleckchem.com/products/mi-503.html found that the strain rate effects of the materials and the concrete material model could have significant effect on the numerically predicted flexural strength and tensile membrane resistance of the panels. (C) 2012 Elsevier

Ltd. All rights reserved.”
“Tibial defect is generally caused by high-energy injury, tumor, osteomyelitis, development deformity and bone non-union after internal fixation. This study was to determine stability of tibial defect reconstruction with fibular graft (FG) of different lengths by single free vascularized HIF inhibitor fibular graft (SFVFG) and double-barrel free vascularized fibular graft (DBFVFG). The left lower extremity of a male volunteer was scanned with computer tomography scanner. The contours of the tibia and fibula were extracted and the

geometry of both bones rebuilt. From this intact model, the models of tibial defect reconstruction with fibular graft and external fixation were developed. Inter-fragmentary motion (IFM) and Von Mises stress on the fibular bone flap, and the locations of maximum Von Mises stress were introduced to quantify the biomechanical environment. Under the condition of the same graft length, the Von Mises stress value in DBFVFG group was 1.37 to 1.77 times higher than that in SFVFG group. When the length of graft was greater than 15 cm in the SFVFG group, the IFM exceeded 1 mm, but the IFM of the graft in the DBFVFG group was always less than 1 mm. The maximum Von Mises stress of models was frequently located at the second or third pin-bone interface. Thus, external fixation can provide a stable biomechanical environment for the reconstruction of tibial defect by both SFVFG and DBFVFG. The second or third pin-bone interface requires intensive care and that in the reconstruction of tibial defect by SFVFG, the graft length should not exceed 15 cm.”
“Objectives and BackgroundRotational atherectomy (RA) is used as a debulking technique prior to stenting in some specialized cardiac centers for calcified coronary lesions amenable to percutaneous coronary intervention (PCI).